Gen 3 trailing arms

[SoundEfx]

Hey All,

My searches on this topic gives me many ways on how to change the bushings, but no information about the arms themselves.

My question is, are all trailing arms from Gen 3 Integras the same?

Meaning, would a 1997 GSR trailing arm fit a 1997 LS?

Thanks.

 

[Ryan659]

You don't need to buy the whole arm. You can replace just the bushing

 

[72Spitfire]

I believe the arms are the same, but the sway bar mount points are different I know for sure they are on the ITR, maybe the GSR also.

 

[OGstackadoIIa]

Just different for ITR; that's why it always specifies non-itr

 

[SoundEfx]

Thanks for the answers guys.
Ryan, the reason why I need the whole arm is because the previous owner damaged the area where it bolts onto the rear LCA.
I found this out when I tried to install my new lca's and they didn't fit because the po shaved the stock lca's to fit in the mangled area.

A new one from the dealership is $370, but there are a few GSR being parted out in my area. So I am wondering if it would fit or not.

Thanks again for the help.