I got a leak!

[1993IntegraGS]

So I got a leak here as you can see in the picture where the red circle is. Does anyone know what that black part is near the valve cover?

 

[94dc4]

Camshaft cap. Common problem. You can get a new plastic one from the dealership for like $12 or you can get an aftermarket metal one online somewhere (recommended). I replaced mine with the new plastic one and it still leaks a little.

 

[XxCaryxX]

Here is the DIY. Somewhere in there it suggests brands to use also.


Link - http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=576

 

[ralph556]

Hi Integra
I had the same problem. All I did was cut a peice of alum. plate about .250 thick, Drill two holes in to match up with the two threaded holes on eather side of the rubber plug. Bolted it in place over the plug compressing it. No more leak.

 

[importtunerman]

ya i got one from honda that was like hard rubber and it works great i put some hondabond on too and it has not leaked since

 

[Samurai_Blue]

buy my skunk2 one

 

[1993IntegraGS]

Thanks everyone.

 

[AcurInteg96]

i need to do this. and dylan does the skunk 2 one have the 3 o-rings?

 

[Samurai_Blue]

i need to do this. and dylan does the skunk 2 one have the 3 o-rings?

yeah all aftermarket ones do. Blox skunk2 PW JDM.