Installing DC Lower Tie Bar ?

[DC2Integ]

So how do i go about doing this ? is it hard to install a lower tie bar and how long is it gonna take ? allright guys help me out !

 

[heykosal]

i dont think its anything too hard. bolts out bar on bolts in. i could be wrong

 

[obd1kenobi]

the hardness part is puting the bolts back in

 

[DailyDB8]

not too hard, it'll take lots of elbow grease if the bolts are stuck. the hardest part if allignning everything to have the bolt slide through all the holes and scure in. the trick is the have the rear end on jack stands and use a floor jack or your stock jack to lift up the lower control arm. it makes it easier to allign everything up.

i'd say easy - medium difficulty. and should take 30mins more or less.

 

[8urcivic]

not too hard, it'll take lots of elbow grease if the bolts are stuck. the hardest part if allignning everything to have the bolt slide through all the holes and scure in. the trick is the have the rear end on jack stands and use a floor jack or your stock jack to lift up the lower control arm. it makes it easier to allign everything up.

i'd say easy - medium difficulty. and should take 30mins more or less.

ha ha.....floor jacks........i have a lift, so my shit like this is always easy.

 

[DC2Integ]

what would get the bolts out easier ? WD-40 ?

 

[DC2Integ]

so this is what came with the bar. So what are those two black triangle things ?

 

[JDMxDB8]

Nice! I'm planning to get the Spoon one.

 

[DailyDB8]

not sure what those triangles are for.... abs brackets?