teginak
New Member
so i basically make an intake myself haha. its actually about the fifth one ive done for myself and friends but they always turn out good and they"re cheap. basically the price of the filter. i used the cheap aluminum ebay intake the guy that had before me had on it and hacked it off at the 80* bend and ised a rubber clamp covered in some electrical tape to attach it to some 3 inch ABS pipe. (i would have used a rubber connector with clamps but lowes was closed and i didnt want to wait. then i cut the abs pipe to fit in my engine bay with the filter attached. i used a filter for an envoy. its a big canister type with a 3" opening with a clamp. but it fits works good and looks mostly clean. let me know what you guys think.
BEFORE:
NOT INSTALLED:
AFTER:
:thumbs up
BEFORE:
NOT INSTALLED:
AFTER:
:thumbs up
Last edited: