ka0ticnight
New Member
So a while back I installed a eBay quality short throw shifter. Upon installation I threw away the OEM bearing that links the shifter to the transmission linkage arm
(part #11 in this picture http://www.hondapartssales.com/lisle/jsp/catimgs/13S0201_B34.png )
Well recently I was installing a new B&M shifter and I realized I didn't have the correct sized (OEM) bearing because I threw it away.
So my question is where can I find this part? I've looked on some OEM sites but often they will say it fits a 2nd generation integra and some civics. And I know for a fact that the 3rd generation intgera has a different bearing than the civics and 2nd gen tegs. The closest bearings I can find are these and I would like confirmation from a pro that these are right???
http://www.hondapartsunlimited.com/oe-acura/54107sa0010
http://www.acuraoemparts.com/delray/jsp/item.jsp?catcgry1=INTEGRA&n=54107-SA0-010&d=ACURA_INTEGRA_RR._JOINT_BUSH
The thing is though, the piece I am looking for is a bearing (again part #11 in the previously sent link), and these two say "bushing". Please help, I am so tired of my sloppy shifter, I am currently just using a bolt instead of the bearing.
(part #11 in this picture http://www.hondapartssales.com/lisle/jsp/catimgs/13S0201_B34.png )
Well recently I was installing a new B&M shifter and I realized I didn't have the correct sized (OEM) bearing because I threw it away.
So my question is where can I find this part? I've looked on some OEM sites but often they will say it fits a 2nd generation integra and some civics. And I know for a fact that the 3rd generation intgera has a different bearing than the civics and 2nd gen tegs. The closest bearings I can find are these and I would like confirmation from a pro that these are right???
http://www.hondapartsunlimited.com/oe-acura/54107sa0010
http://www.acuraoemparts.com/delray/jsp/item.jsp?catcgry1=INTEGRA&n=54107-SA0-010&d=ACURA_INTEGRA_RR._JOINT_BUSH
The thing is though, the piece I am looking for is a bearing (again part #11 in the previously sent link), and these two say "bushing". Please help, I am so tired of my sloppy shifter, I am currently just using a bolt instead of the bearing.