HCFL
1993 Acura Integra GS-R
Took the head off of my motor and did the valve stem seals as well as clean pistons, valves, whole head, etc.
In the process I moved my crankshaft and pistons a whole bunch of times (for cleaning the pistons) and cannot remember which way I rotated the engine.
Engine appears to be at TDC, but not sure if it's 0 degrees or 360 degrees. So I may not be at true TDC.
According to the service manual there is marks on the pulley and timing belt cover. There's so much oil and crap everywhere that I cannot see where they mean. I cannot see the mark on the timing belt cover or any white marks on the pulley. Even cleaned off the crankshaft pulley and could not find any.
If someone can give me a call (I'm out in my garage trying to figure it out) that would be awesome.
1 (780) two three four nine zero eight three
Any help would be awesome.
It's my first time taking apart this engine.
In the process I moved my crankshaft and pistons a whole bunch of times (for cleaning the pistons) and cannot remember which way I rotated the engine.
Engine appears to be at TDC, but not sure if it's 0 degrees or 360 degrees. So I may not be at true TDC.
According to the service manual there is marks on the pulley and timing belt cover. There's so much oil and crap everywhere that I cannot see where they mean. I cannot see the mark on the timing belt cover or any white marks on the pulley. Even cleaned off the crankshaft pulley and could not find any.
If someone can give me a call (I'm out in my garage trying to figure it out) that would be awesome.
1 (780) two three four nine zero eight three
Any help would be awesome.
It's my first time taking apart this engine.