boostedninja
New Member
ok i have a pw0 ecu, can that run my obd1 b16 (ect is on the side of the head not the back)... i think there is a obd0 dizzy on it. cause it plugged right up and the wires match. i have every thing ran except 02 sensors and ect sensor. do i need those to crank or start up. i tried to crank it and nothing.... it just beeps constantly.. can any one help me.. my b16 block number starts with 9/2 is that 1992 . and i have a ys1 tranny is that ls or gsr. its supposed to be all jdm stuff.