OR... I can do it the right way and replace the 4 stock bulbs with the led's, no tape required.speedin said:the bulbs in climate control are very rare to find. check this out for the climate control here is a LINK . heres a hint, on the buttons (once their out)push the plastic piece (with the people on it)from the back and it will pop out. this makes it much easyer to apply tape. also dont use the plastic bag, use wax paper! their u go
Yeah, I know, I already took care of that. I just want to know which intensity to get... not that hard...speedin said:let me see that link to find the right bulbs, btw color may be off by just changing bulbs, u know those "condoms" on the dash light bubls? well those "condoms" are painted on the back of each button. and its a blue tint, so it might affect color.
I have no clue what the stock sizes are, I bought a 1.5 mcd led light from radio shack, and it wasn't bright enough, it was a little too big, but it fit in all the holes, i think it was a 5mm, i think the 3mm bulb will be too small... I'm going to buy 4 of each (5 & 3) just incase though. as I said, I'll post a how to as soon as i'm finished, because it took me FOREVER to find those bulbs, but it was similar to replacing the ones behind the spedomiter (which i did in 5 minutes thanks to the how to). Unfortunently I had to do a guess and check on this one, bc I couldn't find a how to on replacing those bulbs ANYWHERE.speedin said:what are the sizes? i would rather have the bulbs then the tape. more color choices too
I went for theRL5-R8030 and the RL3-R5030... $10, hope it works.speedin said:go for the highest intensity b/c remember u can dim the lights down not higher.
yea, cool. keep me updatedGSRawe said:I went for theRL5-R8030 and the RL3-R5030... $10, hope it works.