Search results

Ohh ok cool thanks..

Ok cool thanks I'll give that a try before I start tearing it down

B

So my timing belt broke while on the freeway and I heard that if the belt goes in our cars that the valves can get bent. So what are the chances that I did bend my valves? I was going about 65.

Im having some trouble trying to figure out what's going on with my head lights when I turn on my low beams they won't go on but if I switch to highs they go on. I checked the under dash fuses and they both look fine. Could there be a chance that both low beams blew out at the same time?

Kool thanks guys..

For some reason my idle screw has been unscrewing its self after driving the car and makes my idle way up high any way to fix the screw to make it so it doesn't unscrew its self?

K thanks that does help

Bumo Sent from my XT1080 using Tapatalk

So can I just cap those off? Sent from my XT1080 using Tapatalk

These are the two extra hoses im talking about. Sent from my XT1080 using Tapatalk

Also forgot to mention its a 91 integra Sent from my XT1080 using Tapatalk

Recently bought a CAI and noticed it only has the fitting for the hose going to the valve cover and no extra holes or fittings for the 2 extra little vacuum hoses and don't know what to do with those 2 extra hoses.. Yes I know its probably a noob question and some ppl are probably going to flame...

Its a fairly easy swap I did mine a few weeks ago. I did every thing my self so saved my self having to pay for labor. All I spent was 350 got all the parts from a doner car being parted out on CL. Sent from my XT1080 using Tapatalk 4

Kool ur welcome

Also forgot to mention your going to want to drop the steering column to pull the pedals out

For the transmission mount i just used some big washers that i found at the hardware store along with some longerbolts

Ok for the duct for the vents your going to want to push it in twards the door and it will slip inside the other duct, after you have done that just pull it down and out twards the center consol and it should come out, now for the pedals first you remove all the lines, it made it easier for me...

If you want i can write you up a little how to for removing the pedals