Search results

  1. M

    Back in the Teg game (99 4 door build thread)

    So it has been a while since I have had an integra. Switched over to the civic hatch life for a little bit. Finally got the offer for another teg and couldnt pass it up. So heres all the info 1999 Integra Gs model 4 door Clean interior Auto (5 speed swap v2.0 coming soon) 177k miles It has a...


  2. M

    Poor man type r bearing issues

    So I just traded around and got a 91 b16 head and a b18c1 block out of a 4 door gsr. Apparently the old motor spun a bearing and they replaced all 4 with oversized bearings and now it won't spin over. Any ideas on what to do? Do I have to replace the crank and get OEM bearings or can I have my...
  3. M

    Brake caliper locking up issue

    So I bought a 92 teggy and it had all 4 calibers locking up going down the road. Before I bought it, the calibers had all been replaced with remanned autozone, pads, Rotors, Hoses on the front master cylinder (LS) and a used 40/40 proportioning valve Idk if the brake booster is RS or LS...
  4. M

    Wiring problem on 5 speed swap

    So I just finished up my 5 speed swap but in all the research I done, I only found wiring for the reverse lights and the starter (park switch). My issue is I can't seem to find and wiring diagrams for the speed sensor. Does anyone know where to straight wire it into? Info on car 94 Integra rs...
  5. M

    Off brand seats?

    So I found these online and his post was vague. I contacted him and he said he paid $560 plus shipping a year ago but unsure about the brand. They don't look like eBay junk (unless they are recaro replicas) but red leather seats with rails, I talked him down to 250. Does anyone know anything...
  6. M

    98 civic staking issue

    So I have a 98 civic with a d16y5 with a slight issue. First happened two weeks ago and now has happened 3 times. After driving for about 10-15 minutes the cel will flash and lose all power. Car will have to have the battery disconnected for 5 minutes, then will crank right up. I'm thinking...
  7. M

    94 Integra Gs Project

    So I came across this last night. The guy said he wanted it out of his yard and was tired of looking at it. I got it cheap and will be making it a project It's a 1994 Acura Integra Rs -190k -short ram intake Now since sincere bought it -dc strut bar -motegi mr116 rims -nitro 215/45/17...
  8. M

    Prelude issues? Help?

    Okay so Im helping a friend with her 98 prelude. Its an auto and has a list of things wrong with it. Instrument cluster stopped working (all of it, will light up but no gauges. Connectors are good) Won't shift past 2nd ( I got it to shift to 3rd one time my using the sequential shift. Have...
  9. M

    Sohc or dohc VTEC with no reverse lol

    A friend of mine wants to trade cars and im contemplating it. So here's the good and bad on both and some pictures at the bottom. Give me your input So my current car is a 98 civicD16y5 roller rocker cams The good EBay coils EBay exhaust system No name 4-2-1 headers The badBad winsheild...
  10. M

    The 9000th b swap question

    So I have been doing research on b swaps in my civic. And I mean a lot of research but I couldn't find and odb answers other than a jumper harness on the ecu. So I have a 1998 civic originally a d16y8 but I swapped in a d16y5. Anyways, the single cams aren't doing it for me. The 5 speed is a...


  11. M

    Common ac compressor issue?

    So I noticed about a month ago that when the ac was on it would put a huge strain on the motor. Everyone told me it was a common issue because of my small single cam motor. It wasn't hot so I didn't really care. Now it's hot as hell and when I go to use it, it will engage for like a quarter...
  12. M

    Tapatalk issues on HTC inspire 4g

    Okay so my old phone shattered and I got a new one. HTC inspire 4g, updated it and it's only on 2.3.... And when I go to download tapatalk, it shows the current tapatalk on the play store. Once I install it, it runs tapatalk 2 (2012 version)..... Can't post pictures or even use CI without it...
  13. M

    Best hub/steering wheel combo

    Okay so I'm looking into a aftermarket steering wheel. Last time I went with cheap eBay knockoff of a spoon wheel and this time I'm wanting better quality without breaking the bank too bad. What is your preference? I was looking into a NRG setup with quick connect for $359 shipping included...
  14. M

    D16y5 swap and having issues

    Okay so as much info as I can give Body is a 98 civic lx Engine was a d16y8 Head was a d15b7 4-2-1 headers P2p ecu All motor So I swapped in a d16y5 vtec-e which is my first time messing with a vtec motor, wired it all up and it purrs like a kitten. Only issue is it won't rev up. Just boggs and...
  15. M

    Bad rings or heads?

    Okay so before I buy a new motor and go through all the hastle, I have a 98 civic with a d16y8 block, d15b7 head. It smokes at idle and a major cloud of smoke when at over 2500 rpms.... Its pretty bad. And a lot of buildup in the tailpipe. (Black) So I can't decide whether it would be rings or...
  16. M

    Crank pulley very loose

    I bought a civic with a d16y8 block, d15b7 head that I was told "something is wrong with the timing belt". I noticed the tensioner was wobbly. Wondering if it was a common issue or if it was major....I know I'm vague but bear with me. Any help or ideas? " I’d rather lose by a mile because I...
  17. M

    Bringing this ej8 back to life

    So I found this car super cheap with a broke timing belt. D16Y8 motor, 5 speed vtec To put it nicely, its rough... rattle can paint job (white) red engine bay (they didn't know what taping off was) headliner is tore seats ripped and its dirty as hell inside. But the pros VTEC 5speed...
  18. M

    Needing help

    Okay so I have looked but can't seem to find replacement mouldings for the integra quarter windows and windshield. Mine are half hanging off. Also the door trim running down the side
  19. M

    Trying to bring life back into these headers

    I bought a used set of headers from a salvage yard and they are pretty rough. They are DC sport 4-2-1 but it looks like they have been painted before. Surface rust on the top but not bad and one quarter size dent on one of the pipes (doesn't bother me). Wanting to try and bring some shine back...
  20. M

    Issue with temp hand

    Hey guys. Been having an issue with my heat hand. Was this way when I got it and have since put a gsr cluster in with the game results. It only works in like bumper to bumper traffic. Any other time it falls off like its not registering. Don't think its a temostat but could be. Anyone else had...
Top