SleepWalker42o
New Member
Okay guys what the fack. This has been killing me for 3 days STRAIGHT now.
Where to start . . .
Right, so my right caliper was seized when i bought the car. First thing i did was hit up Advanced and bought new calipers, brake pads, and rotors. There nothing special, just to get it on the road again.
So im at my buddies house to use his garage (my two garages are packed full of random shit, parents are pack rats) Buy any who, im going through the process first on the bad side (passenger). Taking off the wheel and tire. . . here's the first problem i ran into, the rotor has 2 screws ( WHY!? ) it effin' stripped! I've heard/read that other ppl had the same damn problem. Now i went to go get the Ez-Out bits and bam there out. Next Problem.. the rotor was warped and kept gettin stuck on the wheel studs! Took 2 hours of coming up with shit to get em off, finally a BFH got them off, messing up my wheel studs. Okay so i figured id go buy new wheel studs whoop-tee-doo. Just glad i got them off. Now NEXT problem that occurred. Freaking Hub screw wont come out, 1 hr in i saw that there was a dimple made to keep the nut from turning DOH! Got that off and now ive realized the hub doesn't wanna come off, [Bare with me almost done] . . So i went to rent a Hub Puller from Advanced and it stlll wont come off, oh and let me add something to before, I stripped all the Lug nuts and Studs from hammerin the bitch rotor out. So the Hub puller had barely anything to grab. Pftt it grabbed enough to push the pin in to the axel. But the hub still wont let loose... Whut the hell am i suppose to do?!
Also i was looking to see if i could buy new hub assembly online, and it says i can only get " Rear Wheel Hub Assembly" for my year =/. Would the rear work with the front hub? God damn this is driving me effin crazy.
Please im dying here.. Im a newbie at this. I tried hitting it out too. Also im gon try the PB buster shit or whatever I read somewhere online. Also im going to try to remove it with the 3 jaw puller from GhettoZone [aka autozone]. FML.
Would this 1991 Hub work for my car? Please i hope it does... god damn.
Any Suggestions? Links Pleaseee.
Where to start . . .
Right, so my right caliper was seized when i bought the car. First thing i did was hit up Advanced and bought new calipers, brake pads, and rotors. There nothing special, just to get it on the road again.
So im at my buddies house to use his garage (my two garages are packed full of random shit, parents are pack rats) Buy any who, im going through the process first on the bad side (passenger). Taking off the wheel and tire. . . here's the first problem i ran into, the rotor has 2 screws ( WHY!? ) it effin' stripped! I've heard/read that other ppl had the same damn problem. Now i went to go get the Ez-Out bits and bam there out. Next Problem.. the rotor was warped and kept gettin stuck on the wheel studs! Took 2 hours of coming up with shit to get em off, finally a BFH got them off, messing up my wheel studs. Okay so i figured id go buy new wheel studs whoop-tee-doo. Just glad i got them off. Now NEXT problem that occurred. Freaking Hub screw wont come out, 1 hr in i saw that there was a dimple made to keep the nut from turning DOH! Got that off and now ive realized the hub doesn't wanna come off, [Bare with me almost done] . . So i went to rent a Hub Puller from Advanced and it stlll wont come off, oh and let me add something to before, I stripped all the Lug nuts and Studs from hammerin the bitch rotor out. So the Hub puller had barely anything to grab. Pftt it grabbed enough to push the pin in to the axel. But the hub still wont let loose... Whut the hell am i suppose to do?!
Also i was looking to see if i could buy new hub assembly online, and it says i can only get " Rear Wheel Hub Assembly" for my year =/. Would the rear work with the front hub? God damn this is driving me effin crazy.
Please im dying here.. Im a newbie at this. I tried hitting it out too. Also im gon try the PB buster shit or whatever I read somewhere online. Also im going to try to remove it with the 3 jaw puller from GhettoZone [aka autozone]. FML.
Would this 1991 Hub work for my car? Please i hope it does... god damn.
Any Suggestions? Links Pleaseee.