Will a T3 super 60 with a compressor of .48 a/r and a turbine wheel of .63 a/r spool nice with a stock LS motor at about 10lbs of boost? or is there ne thing else needed to be done to the motor for a better response.
stock bottom ends can hold 275-300whp and be reliable for a few years if tuned properly. a straight t3 on 10psi will only put out about 240. as long as he gets it tuned, it will be perfectly safe.
why are you downgrading? you MOST DEFINITELY will need a retune if you are changing turbos. that t3 is much smaller than the t3/t4 57 trim you have now.
no i have the 57 trim in my teg. im putting this in a 95 hatch si with a LS swap out of a 2000 LS integra. and i just wanted to swap the ecu to the hatch and drive it around. the motor also has 440cc RC injectors like my teg too.
one of my good friends had a teggy with a b18b1 in it and we threw the super 60 on it. Turbo spools up very fast even with a 2.25" exhaust on it with a 2.5" dp. The car made like 206 whp at 10psi something like that. It was a fun car. He sold it and then it got stolen from the guy who bought it...that's the last i heard of it