DIY: Amber interior lighting

JohnCarter

New Member
I distorted my symbols also. The only fix I can think of is to print out symbols and put them inside the buttons. Due to the risk of messing up your buttons, I don't recommend using nail polish remover.
I made up the symbols for printing. It is in .png format so let me know if you can't view it. Photoshoppers feel free to improve this. I don't have a clue how to size it correctly other than trial and error.

http://www.facebook.com/photo.php?fbid=1232418386954&set=a.1232408866716.29265.1724006053
 


Last edited:

DA6righthand

Registered Badass
I distorted my symbols also. The only fix I can think of is to print out symbols and put them inside the buttons. Due to the risk of messing up your buttons, I don't recommend using nail polish remover.
I used nail polish remover. All I did was dip a q-tip in it, gently rub until the blue and white was gone and the black didn't come off. If you used too much nail polish remover or rubbed the button hard it's quite possible to f' up the button.
 

tucents

New Member
the part in this thread is not true is that when you use nail polish remover it wont remove the black paint....YES IT WILL...be careful when you do this because it will remove the black paint..!!!
 

IsaiahD

New Member

1991tegra

Da9 apprentice
is it possible to just use amber bulbs instead? and none of the film or any of that?? i have a da if that helps.
 


Top