Engine Trouble..... NEED HELP!!!!!!!!!

BlckIntegra

BlckIntegra
I have a '91 Teggy, with a B20B block and a B18B1 head... I am having trouble starting it, wen it does start I have to feather the throttle... Otherwise it just dies on me... I don't know whats wrong, like I said before, I'm not well knowledged with imports... If anybody can help me, it would be extremely helpful...
I'll try to post a video later when i have the time...

]http://www.youtube.com/watch?v=Kq7URHOulZg[/URL]
 
Last edited:

mirrorimg

Well-Known Member
Did you put the head on yourself? Did you buy it like this?

You could have the valve lash set too tightly and losing compression or the dizzy is not set properly.

It can be a multitude of other things, but we would really need some more information from you to narrow it down. Have you tried to do anything? Increasing the idle would probably just mask the real issue.
 

BlckIntegra

BlckIntegra
I got the car lyk ths, and it ran fine... Till a few days later when I tried to go to work.. I've adjusted the timing, bought a new distributor, spark plugs, and fuel filter... I've even done a compression test and it passed...
 

Crazyhigh625

New Member
Okay let me get this figured out before I go foward cause same happend to me, what's happening to u, when I bought my car.

Every time you try to get it to start ,when u put the key in the ON postion does the Check Engine Light Stay On For 3seconds & turns off or does the CEL Stay On & doesn't Turn Off??

Dnt crank it jst put the key in the on postion & tell me if the CeL turns off or stays on solid?
 


klutchDb7

ლ(ಠ益ಠლ)
[YOUTUBE="Problem"]Kq7URHOulZg[/YOUTUBE]

Fixed that for ya


Is that your fuel pump I hear?...
 

Reymarpr

New Member
You can check the time bro maybe is delay on time or you can adjust the ignition or the throtle to see is its the time
 
Top