Lip Install Help - no hardware

[Samurai_Blue]

So how do you guys install your lip without hardware, i have 4 screws for the back edges, and no other hardware. the lip isnt drilled out on the bottom as usual so i dont think there is hardware. It looks like you run a strip of tape on top but i want something else. Does anyone know where to buy the z brackets, or have any suggestions? I am not zip tying this lip because thats how i lost my last one.

 

[OLDSKOOLACURA]

3m double sided tape for the middle and self tapping screws

Sent from my Galaxy Nexus using Tapatalk 2

 

[Samurai_Blue]

yeah i have that but im sure it will fall off eventually without something on the bottom

 

[NemesisCBR]

Post a picture of what the lip looks like (not the front). Z brackets can be fabricated with any metal. If there is any amount of flat material that sits flush on the bumper bottom side you can also drill through and use bolts. Ill have to search for the photos I posted before.