Search results

So does the 194 only stay on without blinking?

Just to make sure I have the right intake, it came with an extra tube to reroute a radiator hose. I don't know if that really matters though cuz the same thing may need to be done with the rs/ls/gs.

I'm at work right now so I can't see pics :( So, am I mounting to the actual fender wall or where the bracket is that is holding the black box? I put the intake back together and will probably look at it again tonight. Hey, if you could email me the pics that would work. I'm really just...

It would fit it's just that the tubing for the abs is in the way of the spot I need to put the rubber mount. I know it's not the one for the rs,ls,gs cuz that's how my 92 looks. This has the right bend to got down to the manifold. It's just that the tubes are in the way. And it doesn't look...

I bought a AEM Short Ram for my 95 gsr. I can't get it to fit any way I try. The ABS is wires/tubes are in the way. Any suggestions?

Also right now the inner, larger areas with the bigger bulb are always on and also flash with the blinker. The outer is only blinker. So, let me get this straight. The out lights should always on, and the inners are blinker only? and the sidemarkers only blink, this part I know. Sounds like...

sweet! So, any help on the 3 wires on the passenger side?

I've been searching all over the net and can't find my answer. So, I have the JDM bumper lights. How do I wire those to function like in Japan? Then how do I wire the sidemarkers into those to only blink? And I'm having the issue with 3 wires on the right side? Yeah, I know, test them. I...

Just to make sure. I used the same template on my da. The bottom portion of the template rests on the molding? Crazy that the DA and DC are so close.

Just to clarify this is on my 95 sedan not 92 coupe.

Damn, I was hopin it was like my 96 Civic without holes

FIrst, are there pins behind the rear Acura emblem? Or can I just take it off without patching holes. Does anyone have pictures of the integra in Japan with round heads? What was it called? SIR-G? What USDM "H" emblems fit the front and rear "A" emblem locations. thanks

^^^You have some good points. This car won't be a daily driver. It will be a weekend and occasional driver. I doubt we'll put 3000 miles in 6 months on it. We will most definatly get the 4 wheel alignment. Still debating on the camber kit. Maybe I'll see after we get the springs installed...

Yeah thanks. Already read that. I am trying to get opinions from people that have lowered 1.5".

I'm lowering my 95 Gsr sedan with some goldline 1.5" springs. Yeah, I know, if you don't want ur tires to wear get a camber kit. Do I have to get one? Anyone with these springs?

So how do I wire them so the larger bulb stays on all the time, like a fog light, and the smaller one is the blinker?

I got my set of jdm front bumper lights. How are they supposed to work? The smaller bulbs are the same but the larger ones are only single filament instead of dual like the USDM ones. Also the USDM bulbs won't fit in the lenses. I would just need to sand a little bit but I'm not sure how I'm...

I'm trying to stay on a budget and a local shop here says that they are pretty good quality. Actually it's my dads db8 and he's not wanting to spend too much. He doesn't want it to be too loud either. My cousin has the DC one like this. Are you sure it fits up underneath? I was looking...

Yeah, a link would be good, wouldn't it. haha http://cgi.ebay.com/ebaymotors/OBX-TWIN-LOOP-MUFFLER-EXHAUST-ACURA-INTEGRA-RSX-TSX-CL_W0QQitemZ160095807609QQcategoryZ33636QQrdZ1QQcmdZViewItem

Has anyone used one of these? Pros and Cons? Pictures? Will it fit a 95 GSR Sedan?