Search results

I've recently replaced my broken door handle following the DIY on honda tech. Everything went fairly smooth except for one problem. Before l replacing the handle when you put the key in the driver side and turn it, it would unlock all doors. Now, when I turn the key it only unlocks the driver...

Okay, my B18C1 is in need of a rebuild. I've been burning oil for too long and it's time to take it apart and freshen things up. I don't know much about engines so I look to you guys for guidance. My plans for the motor are to do a stock rebuild and then do a mild build down the road. I...

While removing the rear interior panels, I hit the inside of the latch mechanism with the panel and heard a locking noise as if I locked the car. Now, the only way I can open the hatch is to have the key fully turned in the hatch while simultaneously sliding the hatch lever. Anyone have any idea...

To keep things short, here's a picture of what I'm dealing with IMG_20110811_202400 by MEGAHURTZ5934, on Flickr Look like it was cut and then taped back together. :what: Could this be an easy fix by soldering a new wire connecting the two pieces? If so, what guage wire do I need...

I'm really sorry for starting this thread, but I need to get a hold of him.

I thought I was burning oil, but it looking like I'm leaking oil? OTHER INFO: I had my timing belt replaced a few months back and the mechanic said my valve cover gasket was shot, so he replaced it. I Haven't replaced the cam seal.

Just like the title says. I curious to know how much oil I am burning every x miles. Any help is appreciated.

I've been having problems with my parking light. I finally got a harness from a member on honda tech and I decided to install it. Well, the turn signal light has three wires coming from it. Red, black, and green. The parking light harness has two wires. Green and black. So, I look at my existing...

I have searched and found someone with the same problem as me, but no conclusive answer. When in 1, 2, 3, going at low rpms, my car bucks when I tap the gas, aswell as when I let off of it. I have changed the spark plugs, wires, dizzy cap and rotor, and the fuel filter about 6,000 miles...

I've noticed a loss of power since I've first bought the car. I also noticed that I have a jerking problem when I tap/let off the gas a low rpm's. What could be the cause of this?

I was cruising down the highway and I let off the gas then I felt a huge jerk. Same thing happened when I hit the gas. My gas was pretty low so I thought that had something to do with it. Well, I got off of the highway shortly after and the jerking got worse. About 2 blocks down the road I hit...

I have a few questions. First, I noticed for the first time today that I had smoke coming from my exhaust. This was at start up and it was sort of cold out, so I know this is normal. BUT, I'm constantly needing to add oil. I don't check my oil that often (every 2 weeks at the latest) but, when I...

I'm trying to remove my carpet so I can give it a good cleaning. I found an article on TI that shows you how to remove it by cutting it in some places. I want to know how to remove it without cutting any of the carpet. I all ready know that the center console, front/rear seats, kick panels all...

I don't know if this is in the right place. I'm looking for a RWD car. I'm not looking to spend a whole lot of money. I intend to use it for street and learning to drift. Here are my choices so far. If you know of another RWD, please, let me know. S13 240sx hatchback FC Mazda Rx7 or...

Will any of the 99 integra models ABS units work with my 01 integra GS-R?

I just went to Auto Zone so they can pull the code. Come to find out that it's P1607. I've done some research and found out that it's Engine Control Module (ECM)/Powertrain Control Module (PCM) Internal Circuit Malfunction. One day, I left my keys in the ignition like an idiot and my battery...

http://www.break.com/index/garbage-can-full-of-water-prank.html?mrr=we

DELETE PLEASE! made a duplicate thread.

Im having trouble removing the vacuum lines from the iacv. I know it needs to be cleaned because I could see how dirty it was when I had everything (except for the lines) disconnected.They're on there pretty good. Is there an easy way to disconnect these lines?

What is the proper way to care for your microfiber/foam polishing pads?