Search results

If yall read my threads, i had a 00 teggy boosted. But i blew my block up =(. rod bearing snapped, cylinder 3 piston slapped up and hit my spark plug, and seized my motor, failedd.. I had a head work was done but never did the block. So i am going to build a hatch i just picked up, and have a 94...

Hey guys, i keep blowing My alternator/ Speed sensor fuse under the steering column. I can't find out why it keeps blowing out the fuse. This had gave me an issue before but i had fixed it due to my battery cables. I redid my battery terminals and everything. Now 6 months later it now continues...

Hey guys, i change my vehicle speed sensor, and still my MPH gauge does not work, and it wont allow me to go over 4000 RPM. But my RPM on the cluster works fine. I was wondering what were my other options i would have. Any ideas will help thanks.

Hey guys i was just wondering, i start up my car let it idle to operating temp, and my raditor fan does not kick on. I took two 16 gauge wires, connected to the fan str8 to the battery and the fan kicks on. Im not over heating because i let my car run for 1 hour and a half and it did not over...

Hey guys i pulled my motor to swap out my block and bulid. i put everything back together but there is just one sensor that i can't find. All i can see is the plug which is almost off and attached to the alternator plugs. i can take a picture if needed. please can someone help me? :(

Hey guys does anyone know the preset on the AEM Cam Gears that are installed with Crower Stage 2 Turbo Camshafts? Advancing or Retarding it back or forth?

i just bought a Blox fuel pressure regulator and recieved it today. its the same one as this http://cgi.ebay.com/ebaymotors/BLOX-FUEL-PRESSURE-REGULATOR-FPR-GAUGE-INTEGRA-CIVIC-GD_W0QQcmdZViewItemQQcategoryZ42604QQihZ012QQitemZ220411965449QQrdZ1QQsspagenameZWDVW But how do i bolt it onto...

I want springs that are good quality not to exspensive. i dont want much of a slam for me to crack my oil pan or scrap my front mount.

hey guys i was just wondering i got AEM cam gears at home from a friend. I am going to throw them on my Crower cams. i just wanted to know what were the preset on the AEM cam gears. or does it even matter?

i have a Skunk2 pro series Intake manifold, and i was just wondering what throttle cable bracket i would use. I can't use the My LS one because it gets in the way of a sensor. Please give me some info

hey does any one know what is the bore on a Stock LS throttle body? also if it be ok to use on a skunk2 intake manifold because of short money?

hey guys i just got a new b18b1 block and im putting everything new. im going to boost this b18b1 like mines, but i just wanted to know what kind of head gaskets out there our good. I heard cosmetic was probably only good for all motor. So i was looking towards Apexi, Greddy, Spoon, and HKS. I...

Hey guys my car is having weird misfiring problems, It sutters constantly. I changed my spark plugs and still is doing the same thing. Can it be the fuel filter? the compression test shows that it is good. but the only thing i havent really take a look at is the distributor. what else can cause...

is there anything that would leak oil below the oil filter? is there any hoses or anything that connects to the block? My car is still leaking oil after patching the hole on the block with JB weld. and it did hold up but it still leaking oil near the oil filter. can someone give me a picture of...

im leaking from behind my block where my oil distributor for my turbo cause i drilled a little hole on the side wall to get out an extractor. but i guess i didn't hit the extractor. =X will JB weld hold up the oil pressure? its a small hole but leaks like a water fall when i start up the car.

hey guys i just wanted to know how are the Yokohama Prada Spec 2 tires? has anyone ran those tires before? and how were they for street and for track?

Will a T3 super 60 with a compressor of .48 a/r and a turbine wheel of .63 a/r spool nice with a stock LS motor at about 10lbs of boost? or is there ne thing else needed to be done to the motor for a better response.

im currently running a t3/t4 57 trim turbo right now in my teg. but im probably going to build a hatch. how our the T3 super 60 with a .48 a/r compressor and a .63 a/r turbine?

No matter what i do adjust it to hard or soft on the bov the valve still closes to late and when i let off the gas u can hear it whistle cause it closes to late. is there a way to fix this?

Hey guys i was wondering im getting a new turbo. Im getting the Garrett GT28RS aka disco patatoe. I was wonder how much power or improvement i would make you think?