Search results

hey guys just bought a holset he351cw turbo and had a question while i wait for it to arrive. That turbo has a 4 inch outlet on the exhaust side and i was just wondering if i could make a 4 inch to 3 inch downpipe. Or do i have to run 4 inch all the way back? Thank for any advice..

Hey guys looking to do a 5th gear swap and had a question. Do i need the gear on the output shaft only or do i need the input and output shaft?

Hey guys trying to figure out if I have to send my buddys teg to the frame shop after a little fender bender. Could some one please give me the measurements between the two front rails. We already order the new core support just wanna make sure everything lines up.

Hey guys my question is i picked up a 12.5 lbs flywheel having it surfaced right now, do i have to buy a new clutch to go along with it? The one i have has less than 7k miles on it. And also do i have to redo the break procedure? Thanks if this has already been covered.

Hey guys i recently put a jdm b20b in my 95 dc2 and ive been looking at putting a stage 2 cam in it. I know of brian crower, crower, and delta cams. 1. Are there any other cam companies for non vtec? 2. What do you guys think about different intake and exhaust cams? (i.e 272 Intake 262...

Got a package in the mail today. A big peace of the salt flat race teg I'm building. Pretty excited I'm gonna be in the 2.0 class run a fully built turbo'd k20a2. Here a nice pic, the turbo on the left is a stock 300zx turbo I had on my ls motor great street turbo but not big enough for what I need!

Hey guys looking for an answer to my problem. Doing a g23 build and im looking for some type s pistons. Im looking for new ones so please no offers for old ones. I looked on an acura dealer parts site and i see 3 different piston part numbers, 13020-PRB-A01, 13020-PRB-A00, 13010-PRB-A01. Which...

Hey guys I was wondering if my ecu is bad. Over the past year it doesn't matter what sensor has failed I always get a code 5. Which is for the map sensor right?

Hey guys i just had to do some head work on my 95 ls. One of my valves was chipped so i replaced it had the head milled and a valve job done. i replaced all the gaskets, the timing belt, water pump and belt tensioner. All the timing marks line up but when i try to start the car it just turns...

Hey guys i have a 95 ls and i recently bent a couple valves when my timing belt slipped. I bought a head and had it resurfaced and all new valve guides. Do i have to replace the headstuds even though it wasnt overheated or anything?

Hey guys came across this today and which is better aluminumized or stainless piping? http://www.mandrelexhaustsystems.com/servlet/the-19/94-dsh-01-ACURA-INTEGRA-EXHAUST/Detail

Hey guys tryin to do a little research on the k series and im not sure which one i wanna go with. The k20 or 24? i like the fun factor of the k20s high revs but how often does that happen in a dd but on the other hand i like the torque of the k24. Also what production years should i get? Thanks...

I need to know were i can get the screws that hold the rotors on our tegs? Can i just call any acura or honda dealer? And if so are they called rotor screws or what?

Hey guys first off i have a 95 teg with a b18b ive been getting a slight hesitation above 3k and ive done a complete tune-up except injectors but was told that when i bought the car they were new. A friend of mine sid that it could be the ecu. Now heres the question the car has a p75-a01 and...

I have a 95 ls with 159000 miles on it and ever since i bought it its hesitated from about 2500 to 4000 rpms. Ive tried everything in a normal tune-up and its only threw one cel which was the map sensor but i replaced it. Funny thing is that it ran better with the cel on. No hesitation at all...

I bought some unorthodox racing pulleys and i was just wondering if they actually work? I have a 95 ls with port and polished head intake full exhaust and im just trying to go thru the bolt ons right now got them mad cheap so please give me some feedback!

cel came on and it came up as a error code 5 says map sensor or mechanical problem. What do i do?

Where is the port at on a 95 ls?

What is the piece that goes in between the fender and the bumper? It helps attach the bumper to the fender and i need one. Thanks!

?I have 95 teg ls and i just put a test pipe on and now i have cel light on. Is there a simulator for od1 cars? Or what else can i do? I plan on getting a high flow cat soon i just could get the car to the muffler shop to put one on seeing that the car does have a front end and no i live in...