Search results

http://photos1.blogger.com/x/blogger2/8020/879303520282270/1600/z/42708/image-upload-19-736854.jpg here's a fuse diagram this should help locate what fuse it is

The pump or nozzles could be clogged try cleaning them up first, and check to see if your hearing the pump when u push the lever. If not it could be then bad pump or its not getting power.

Clean up the throttle body, make sure the vacuum hoses are good, and the o-ring on the map sensor is good. If that don't work try replacing the map sensor.

http://www.jdmenginesamurai.com/engines/honda/jdm_engine_b16a3.htm heres a link for the specs on the b16a3 and has another link for performance changes you can do, but most look like it was already done from what you described. The only thing thats left is to start doing internal changes. So...

well basicly make sure your engine is healthy enough to handle boost, and if so then just get what you can afford

go audio cause if it looks a lil beat up then they wont wanna mess with it lol

when u replaced your old antenna with the shark wasn't it a power antenna? just use those wires to connect the shark.

if your replacing them just pull it off its just clipped on. but if you want to save them take the door panel off and go inside to push the clips threw.

4 gauge or 2 gauge will work fine

well i dunno if it does or doesn't fit, but if it doesn't you can take it to an exhaust shop and they can make it fit :)

with the tan or brown colors there darker for the 94-97 then got lighter for the 98-01

Well depends would you like to go a lil faster or have a better handling and ride. But either way doesn't really matter which you do first, just a matter of what you can afford at the moment.

It only change over if its the same motor a b18b, if its a b18c then it wont. Also if the one you found is a b18c your better off just keeping that and getting a manual transmission cause thats a better motor.

maybe you can find one on ebay

http://www.commandocaralarms.com/wiring/1996-1999/Acura/Integra/49.html do you have the right wire connected to the door trigger? i had to take mine out cause it wasnt working nomore, and at the process i saw they had a couple of trial and errors with the wires for that door trigger.

look for the flasher relay

http://www.honda-acura.net/forums/integra-and-97-01-integra-type-r/279261-looking-for-eld-sensor.html

yes i read your whole post and what im saying theres only 3 belts to pick from an ALT belt, a Power Steering belt, and then the a AC belt you need. Maybe you should try another store cause it seems like they dont know them selves

but theres only 3 belts a drive belt a alt belt and power steering belt. i dunno why they give u 3 different size to pick

get a type r youll spend bout the same building yours up