Hey guys, so I finally went to try and fix this issue ive been having (was going through some personal stuff during summer that is why i stopped replying). So last time I took it to get aligned, the left wheel still had camber wear to it due to it not being fixed. the guy told me the camber kit was already maxed out. So i took it to another place and they told me the same thing (recommended place), and they told me the same thing, it is already maxed out. i'm still off by 2.3 degrees. I also need a rear camber kit as well. My car is not that low so that is why im lost as in to what I need to do. He also said that i dont have coil overs, that my springs were cut or most likely heated to drop the car. So Im assuming I need actual coil overs. He said my car can't be low and have no camber wear, but I've seen other cars lower than mine with straight wheels.
Here is the print out of the sheet for the alignment
Here is a pic of my car tire which shows that it is not that low
the gap between my tire and fender is about 1 inch.