Search results

I'm rebuilding my ls for boost and picked up a set of used Wiseco 9:1 81.5mm pistons without rings, should I buy a new set of wiseco rings for the pistons or should I get oem or another brand?

I'm building up the internals of my ls bottom end and picked up a set of eagle ls h beam rods last night for cheap and found a set of wiseco pistons on ebay today...

I'm buying a mishimoto full size rad and fan shroud with the 2 12" fans and was talking to my friend and he said since I'm putting on a blox cast turbo manifold and a turbonetics t3/t4 .50 trim turbo I might have clearance issues between the turbo manifold and the radiator, does anybody know if...

I ran my integra at the track on friday and the 1/4 mile times seem slow. the lowest we could get it to do was 16.5 its a 95 ls with just bolt ons the mods are: skunk2 ls intake manifold mr gasket cold air intake dc sport 4-1 header exedy stage 1 organic clutch yonaka full catback with...

I picked up another teg a few months ago after I totaled my old white one, swapped the engine from the old white one into it and my gsr interior and then just been slowly fixing a few things. I picked up a yonaka catback from jayjay the other week and put it on. sounds good and quiet compared...

I swapped my tan dash out of my 95 integra for the 97 black dash from my old car and left the dash wiring on the 97 dash, everything plugged in fine and works but for some reason after i finished it the horn and turn signals dont work but the flashers do. I fixed the horn problem by swapping the...

So over the past few days I've gotten pulled over a couple times for speeding and I've realized that my speedometer is off by about 7-10mph (i double checked my speed with my garmin gps) and the reason its off is because my transmission is a b16 transmission from a 99-00 si. Now im wondering...

I have a 97 integra and it keeps giving me code 1382 which from my research it seems to be the cyp sensor. all the threads I've read say that I need to replace the whole distributor to fix the problem but a few people said that its just a sensor inside the dizzy that needs to be replaced. Is...

Best part is the bad stuff lol but its a nice car just the engine seems beat http://allentown.craigslist.org/cto/2100394502.html

so I got my integra running good now but the exhaust sounds ricey :roll: I'm assuming this is because its running 2.25" straight pipe catless back to some muffler on it that doesnt have a name brand my question is... If I put on my HKS Hi-power muffler will that get rid of the ricey sound or do...

Alright so I've been looking for a good b18b1 engine to throw in my teg for a DD but couldn't find anything good and garuanteed around me for under 700 but I picked up a engine for 300 that needs a rebuild. I've never rebuilt a engine but I have a few experienced people that are going to be...

sooo im looking for a head to put on my ls motor, only mods it has are, intake, header, and exhaust. I havent been able to find anybody around my with a good ls head and was wondering if i put my head off my turbo engine on will it work? its ported and polished, has crower dual valve springs...

sooo I pulled my head off tonight thinking it was just a head gasket and found out why my compression was ranging from 90-120, the exhaust valves are all burnt red and you can stick a finger nail in the valve seat, sooo now its time to start searching for a new head fun fun heres some pics...

sooo my engines finally ready to start and i went to start it last night and it cranks but wont start. Im getting fuel and spark but when i did a compression test the readings where anywhere from 90-120psi :roll: soo i called the guy that i bought it off of and he says oh well it ran when i...

sooo im really confused about the timing on my b18b1, when i bought the engine it was missing the distrubutor no big deal though since i had a old one from my 96 (this engines a 97 so yeah both are obd2). I started out ligned up the enigne at tdc with the white line on the crank pulley and the...

so i picked up a 97 integra motor on sunday to put into my 97 ls, i bought it without a wiring harness on it and figured since i had a obd2a wiring harness laying around from my old motor i wouldnt have any problems. So today I started plugging in the connections and found out that the...

im in the process of swapping the motor and trans out of my bubble into the teggy and figured that while i have the motor out to check to see how much life is left on the clutch. it appears to need a new clutch and im looking for some opinions what would be the best clutch to run im only...

yep i got another one dc4 after going from my first 96 dc4 to a 88 mustang (pos) then to a 1978 civic hatch 1200cvcc 4 speed manual (ballin but rusted) then traded the civic for a 90 4 door teggy that i converted to manual but then sold it and then got a eg hatch that was wrecked but had a built...

its a 1990 4 door RS integra traded a 1978 civic for her, it was all stock but the people before me had kinda riced it out with stickers, dohc vtec on a non vtac car, sooo since it was soo cheap we decided to make it a track car for my friends highschool challenge run / senior project at tech...

soo i was coming home the other day and saw a lip sitting along side of the road and picked it up got home lined it up with my 90 4dr integra and it looks like it should fit on, but im wondering, what lip is it heres a couple pics of it lip laying upside down lip laying ontop of my soon...