CKnight90
New Member
Ok. Up to this point i feel this is over my head. I have no idea what the equation will be to figure what I need along with if it was givin' to me I wouldn't know If my conclusion would be correct. I asked the guy who did my measurements what bearings to get, he said STD ACL. If you see that Picture with the measurements he did write down green. All this is things I want to learn but from the right people who will show me the correct ones then show me how they got to the point how they got the ones I needed. I'm more of hands on then my other friends who just Pay to get their build done. I want this build to be my own, not bought built.Why wouldn't the measurements he gave you work? What makes you assume this? We are saying you need to take what he gave you, do math, and figure it out.
Your block has been rebuilt. The oem numbers on the crank, block and rods are pointless because you don't know for sure if any of them have been touched. Prime example is the ARP rod bolts. ARP rod bolts require rods to be resized...making the oem color codes pointless.
I messaged the previous owner(frined) if he could try to get ahold of the guy who did the building. I told him to ask what was done to the crank, journals, rod ends, rods, block, and what bearings were used before for the mains & rods.
Last edited: