Search results

Alright guys... I'm tired of looking at my ugly "milano red" da which hardly has a clear coat left on it so I'm going to paint it myself. I know, most people don't recommend it but anything will look better than what it does now. I work at sherwin williams and was looking through a bunch of our...

Well I got a problem with my ecu right now and I have to get a new one and was wondering should I get another pr4(obd1)or should I go with the p75(obd1)? I actually have a 95 b18b1 block with a 91 pr4 head with cams from the head of the b18b1, with a 92 intake manifold. I know it isnt going to...

Recently I had a leak on my passenger side axle seal. I went ahead and bought another seal from advance auto parts and when I was taking the old seal out, I'm afraid I may have damaged behind where the seal sits. I did something stupid when I took it out. I drove a screw driver into the old seal...

When I bought my integra, it had an aftermarket steering wheel already on it. I just installed a stock steering wheel back on it so I could use my cruise control again. Well, I can't figure out where the plug from the steering wheel goes to. I have another male plug that is in the steering...

I have had symptoms lately of a bad fuel main relay. When I try to initially start the car, I get no fuel pressure therefore the car won't crank. And then I hear a click from the relay and instantly I get fuel pressure and the car starts. When I have no fuel pressure, the c/e light will not go...

I currently have a problem on my integra. The third cylinder so I started pulling wires until I pulled the one that had no affect on the way the engine ran. I found out the third cylinder was not firing so I swapped spark plugs with another cylinder, pulled the wire on the 3rd cylinder again and...

Well Ive been on this site for about a month now and have asked many question and now I got my first shots of what I been working on. It needs some love and its getting there but I have to take one step at a time. I got my first step done which is getting my new engine in and running good...

Yesterday I was driving the car back to the house after my engine swap and had a check engine light come on. I got on here trying to figure out how to check it and found that the plug you have to jump is under the glove box. Well, i started lightly pulling the wires out and found the one I was...

That place blows!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! A bunch of jackasses that go around closing threads and trying to keep you from posting anything. some of there members are just as bad. Sorry just had to vent that out. They just pissed me off over there.

Well I got the new engine in and it runs great. But I'm having an issue with my clutch pedal. When I push the pedal in and begin to release it, the pedal does not spring up with my foot. It does come back up but Its like there is some resistance. Ive tightened the clutch cable on the tranny and...

I'm in the middle of trying to take off the outer cv joint on the driver's side. I'm replacing the boot and the outer cv joint has to come off. Ive read that you just hit the inner race with a hammer and it should come right off. Well it has not come off and I've taken a few good wacks at it. I...

I hate making a thread for this but how do you go about getting a manual transmission mount for a Generation 2 integra???? Autozone, Advance, nor O'Reillys can find it. They can find it for an automatic but not a 5 speed. I know i could get it at the stealership but I dont wanna pay an arm and a...

Well heres my story... I bought a 92 integra ls about a month ago with a knocking rod. I ended up buying a 95 integra b18b1 engine for $250. I put the engine in the car and immediately did a compression test. All the cylinders checked out at about 160 except for the 1st cylinder that read 0. I...

Hey guys. Once again I have another problem. I finished hooking everything up today and went to start the car and I got nothing. No click from the starter or anything. I tried to jump the car off thinking the battery was dead, but nothing. All my dash lights come on, fuel pump comes on. Its as...

I noticed the thermostat housing is a little different between the b18a1 and b18b1 engines. The b18a1 has an extra spot for a smaller hose that connects.(I dont know where it connects in the engine bay) The b18b1 does not have this hose and is just blocked off. Should I switch over my...

How to swap in a B18b1 in a 92 ls I found an engine from a 95 integra to put in my 92 with a blown motor. Is it as easy as putting the b18b1 in and bolting everything up to it??? Does the ECU need to be changed??? 92 axles work with it?? Any special wiring?? I'm new to integras and cant seem...

92 LS Bent rear strut??? I am looking at buying a 92 integra ls. The guy hit a curb with the car and he claims that the rear strut is bent. Something is obviously bent in the rear because the top of the tire sticks out slightly. Could this be a really big deal or something that can be replaced...