Search results

Evening folks, 248k bone stock, 5 spd 94. Just recently my teg started observing some strange behaviors. 1 - warm/hot starts and idle conditions, it will die after getting above 125 degrees, or up to temp. Never done this, it tries to run but dies. Run it a couple blocks and its fine. (air idle...

Afternoon, I have a question which puzzles me at the moment. I have a 94 LS, 18b, 5 spd with 240K on the clock. Changed the valve cover gasket and plug well seals, which I had no idea why the seals were needed until I got the cover off. Anyways after that it got its oil dumped etc and one of...

All, My 94 Ls b18b1, 246k on the clock needs front and rear main seals. Can they be replaced without pulling the engine out? The compression is fine, and the top end has no leaks yet. Tho it sits for months at a time and does leak oil out of the mains. Um asking as I only see it 2-3 times a...

This is a simple question, which Im sure I know the answer to but not entirely sure. Are all b18 oil pans the same? Apparently over the winter my 94 LS made a mess in my brothers garage and I just found out. Hes going to check the level and put it on ramps tonight to see if its the plug or not...

Afternoon folks, I am curious as to what to use for a cylinder head for a motor that I picked up to use as builder replacement for the one in my car. Its another b18b1, but for heads, I have seen factory p75's ported/polished out made to flow ok, theres always the lsvtec build, but this weekend...

Im looking at doing tranny work when I drive my car to my dads house this summer. Last summer I did an air intake, header, and full exhaust. Im looking at a lower geared trans so that when on drives with my dad and brother Im not left in the dust especially going over mountain passes. Im looking...

Anyone here ever use this kit? It looks nice an complete. http://www.ebay.com/itm/Honda-Acura-Turbo-Kit-Civic-Integra-CRX-/271084826170?_trksid=p2054897.l4275 Im looking for a complete kit, but want something worth buying.

Can anyone tell me whats supposed to go with the top banjo bolt on the fuel filter? I fired up my car for the first tome in 3 months and its leaking from the banjo bolt. I see two copper washers but nothing else. Thanks

Afternoon folks. I have spun around 180 degrees on my build plans. I sold all my na parts and now thinking of going turbo as my car is not going to be barged out to where I live after all. I found a couple of kits and wondering about if anyones used these before: The CX Racing kit for 739 -...

I have looked at others build threads, and wondering if anyone would happen to know if there are any under 10:1 compression pistons for a b18b1. I haven't found any online. Im looking for right around 9.8, possible 10.0 but no higher as the crap gas that is here where Im at in AK would...

I got a question about different cam profiles and companies. I have a bone stock 94 ls. At the moment, Im in the process of getting and AEM sri, skunk2 IM, dc sports 4-2-1, and a yonaka cat back. That takes care of basic bolt ons, and now its time to touch the head. Ive been searching for a p8r...

Howdy folks, I got a issue that I cant seem to find the cause of, first off my check engine light comes on intermittently (no 1 cyl position), and the abs as well. They come on and off all the time. Its been to 3 different dealerships, checked all the sensors, timing, abs hcu, the abs module...

Can someone answer a question for me? I have a 94 Teg, Im in Fort Nelson on my way to Anchorage, but is there a rim that is not steel/hub cap? The 14" rubber on it absolutely sucks and is causing some wondering issues at higher speeds, especially with the Alcan being a well worn road. If any...

Hi folks, New to the forums, and I've spent the last three days trying to search for some answers to a few questions that I have. I have a roots style blower from a Mazda Millenium, it was brand new that my brother was going to use on his s10 xtreme but went the turbo route. Its meant for a 2.3l...

Hi all. I got my 94 LS coupe in November. Last week the check engine light came on for the first time since I've had the car. It didn't go into limp mode as I expected it to, just ran fine. It went to the dealership for a diagnosis before I head up the alcan to store the car in Anchorage. Is it...

Howdy, I just got my integra in October. Its a one owner 94 LS with 240k on the clock. Im looking at replacing all the bolt ons before I drive it back to Alaska this summer. Im looking at getting a good quality fuel pum but something probably a little better than stock. I know theres AEM...

Howdy folks. I got a 94 LS coupe. Im wondering where the ecu is located in the vehicle as well as how hard to pull the distributor out of it. It dies randomly, and was towed to the dealership. They cleaned the dizzy up some and it ran for a week. I died today again, wait 5-10 seconds and it...

Hi, Ive got a 94 LS coupe. Im wondering if anyone here has messed around with chipped ecu's at all as Im thinking of getting one to use for fuel and ignition control for a mild build. Im just curious, what folks have tried and had good results with as Im extremely new to doing this kind of...

Howdy, I'm new to the honda scene. I've read some but I have a question about exhausts. I have a bone stock 94 teg ls 5spd. Looking to build up some power by going n/a as turbo isn't really my style. Been looking at headers, cai's, cat back exhausts. I know there is a difference between the...